1. Home
  2. Flyhammer racing parts
  3. Racing accessories
Flyhammer swingarm pivot bushings +/- 2.5 for RSV4
Flyhammer swingarm pivot bushings +/- 2.5 for RSV4

Flyhammer Swingarm Pivot Plates +/- 2,5 for RSV4

Enhance the Handling of Your Aprilia

Description

A set of plates machined from solid material through CNC processing. Produced by FlyHammer, these plates allow modification of the swingarm pivot point.

Technical Details

  • 2 plates for the right side and 2 identical plates for the left side
RSV4 models up to 2015 have the swingarm mounted in the '+2.5' position. RSV4 models from 2016 to 2018 have the swingarm mounted in the '-5' position. With this kit, it’s possible to adjust the swingarm pivot height for all RSV4 models. The most commonly used offset is typically +/- 2.5 mm. If a different measurement is required, it must be specified at the time of order selection from:
  • 0 mm
  • +/- 2.5 mm (default measurement unless otherwise specified)
  • +/- 5 mm
OFFSET +/- 2.5mm
Compatibility RSV4 2009-2014 RSV4 RF 2015-2016 RSV4 RF 2017-2020 RSV4 1100 E5 2021-

Flyhammer Swingarm Pivot Plates +/- 2,5 For Rsv4

  • RSV4 1100 — EU 21-24 / US 21-25
  • RSV4 — 2017-2020
  • RSV4 1000 — 2015-2016
  • RSV4 1000 — 2009-2014
€ 77,87
Racing accessories
Available in the package
0mm engine mount kit and swingarm pivot +/- 2.5mm
FlyHammer
Flyhammer Chassis Adjustment Kit for RSV4 - +0 Engine Position and +/-2.5 mm Swingarm Pivot
€ 225,00
 - 10%
instead of € 250,00